Agilent Technologies N5161A Stereo System User Manual


 
Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 67
Preliminary Basic Operation
Preliminary Working with Files
Loading (Recalling) a Stored File
There are several ways to load (recall) a stored file.
For an instrument state file, use the Recall hardkey shown in Figure 3-10 on page 69.
For other types of data, use the Load/Store softkey (shown below) that is available through the
menu used to create the file.
Loading a File From USB Media
To load a file from USB media, use the USB file manager shown below.
File Type
List
State
Waveform
User Flatness
User Preset
Recall From
Sweep menu
Save menu
Mode menu
Amplitude menu
User Preset menu
This key changes, depending
on the selected file.
File > Catalog Type > <type> > More > USB File Manager
or
File > More > USB File Manager
or
Insert the USB media
Copy & Select User Flatness
Copy & Play Waveform
Copy & Play Sequence
Enter Directory
Recall Instrument State
Load List
Install licenses
No action (USB disconnected)
Use As
If the signal generator does not recognize the
file, you must select how the file is to be used.
File Type
List
State
Waveform
User Flatness
User Preset
License
Extension
.list
.state
.waveform
.uflat
.uprst
.lic
Pressing Select with file highlighted...
loads list and starts sweep
load instrument state
loads and plays waveform
loads and applies user flatness
loads and executes user preset
installs purchased license
For details on each key, use key help as described on page 42.