Filter
Top Products
50 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide
Basic Operation Preliminary
Configuring a Swept Output Preliminary
Routing Signals
Sweep > More > More > Route Connectors
Routes Step or
List Sweep
These softkeys are
only available for
the N5162A/82A
with a BBG.
Source Settled
is not effected
by Trig Out
Polarity Neg
Pos softkey
selections (see
page49).
N5161A
1
/62A
1
/81A/8
2A Only
N5183A Only
N5183A only:
Optimizes the
N5183A 10V
Step Sweep
(Sweep Out)
BNC setup with
the 8757D.*
* The N5183A
signal generator
does not support
the 8757 system
interface.
For details on each key, use key help
as described on page 42.
1
The N5161A and N5162A are identical to an MXG with a front panel display, except that the front
panel, hardkeys and softkeys functionality are only available through SCPI commands or the
Web–Enabled MXG. For information on the Web-Enabled MXG, refer to the Installation Guide, the
Programming Guide and the SCPI Command Reference.
page 116
Routes non
Step or List
Sweep signals
(i.e. SCPI
command
development.
Routes Step or
List Sweep
signals.
Routes non Step
or List Sweep
signals (i.e. SCPI
command
development.
These softkeys are
only available on a
N5162A/82A with a
BBG.
This softkey controls
the Event 2 marker
control
(N5162A1/82A only)
on the rear panel