Agilent Technologies N5161A Stereo System User Manual


 
Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 307
14 Troubleshooting
NOTE For the N5161A/62A the softkey menus and features mentioned in this guide are only
available through the Web–Enabled MXG or SCPI commands. For information on the
Web-Enabled MXG, refer to the Installation Guide, the Programming Guide, and to the SCPI
Command Reference.
Display on page 308
Signal Generator Lock–Up on page 308
RF Output on page 308
No RF Output
Power Supply Shuts Down
No Modulation at the RF Output
RF Output Power too Low
Distortion
Signal Loss While Working with a Spectrum Analyzer
Signal Loss While Working with a Mixer
Sweep on page 311
Cannot Turn Off Sweep
Sweep Appears Stalled
Incorrect List Sweep Dwell Time
List Sweep Information is Missing from a Recalled Register
Amplitude Does Not Change in List or Step Sweep
Internal Media Data Storage on page 312
Instrument State Saved but the Register is Empty or Contains the Wrong State
USB Media Data Storage on page 312
Instrument Recognizes USB Media Connection, but Does Not Display Files
Preset on page 312
The Signal Generator Does Not Respond
Pressing Preset Performs a User Preset
Error Messages on page 313
Front Panel Tests on page 314
Self Test Overview on page 315
Licenses on page 317
Contacting Agilent Technologies on page 317
Returning a Signal Generator to Agilent