Agilent Technologies N5161A Stereo System User Manual


 
Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 135
Preliminary Basic Digital Operation (Option 651/652/654)
Preliminary Storing, Loading, and Playing a Waveform Segment
2. Press Load Store to highlight Load, then, using the arrow keys, highlight the desired waveform
segment.
3. If there is already a copy of this segment in the currently selected media and you do not want to
overwrite it, rename the waveform segment before you load it (refer to the previous procedure).
4. Press Load Segment From currently selected Media.
To load all files from the currently selected media into BBG media, press
Load All From currently selected Media.
Storing/Renaming a Waveform Segment to Internal or USB Media
Use the following steps to store a copy of a file in BBG memory to the currently selected media
(page 73). If you have not downloaded a waveform segment, either refer to the Programming Guide,
or use one of the factory–supplied segments.
1. Press Mode > Dual ARB > Select Waveform > Waveform Segments.
2. Press Load Store to highlight Store.
3. Using the arrow keys, highlight the waveform segment you want to store.
4. Optionally, rename the segment.
If there is already a copy of this segment in the currently selected media and you do not want to
overwrite it, rename the waveform segment before you store it:
a. Press More > Rename Segment > Clear Text.
b. Enter a name for the waveform segment.
c. Press Enter > More.
d. Highlight the waveform segment that was renamed.
5. Press Store Segment to currently selected Media.
6. Repeat Step 3 through Step 5 for all segments that you want to store.
To save all segments from BBG media to the currently selected media, press
Store All to currently selected Media.
Playing a Waveform Segment
1. Press Mode > Dual ARB > Select Waveform.
2. In the Segment on BBG Media column, highlight the waveform segment you want to play.
3. Press Select Waveform.
4. Set ARB Off On to On.
This plays the selected waveform segment. Both the I/Q and ARB annunciators turn on, and the
waveform modulates the RF carrier.