Filter
Top Products
Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 117
Preliminary Optimizing Performance
Preliminary Using LXI
Figure 5-25 Configuring LXI Output Events
Utility > More > LXI
Indicates the
instrument is
waiting for a
trigger.
Indicates whether or
not a measurement
operation is underway.
Indicates whether
or not the
instrument is
sweeping the LO.
Indicates that the
instrument is
settling.
Only one edge of
the instrument
event is transmitted
Disables the LAN
event.
Typical operation
where both edges
of the instrument
event are
transmitted.
Enables or
disables the
instrument event
LAN0 – LAN7
page 116
page 50
page 115
These are the pre–defined default outgoing LAN event identifiers and can not
be deleted.
The generation of an outgoing LAN event is dependant on the LAN event
identifier being enabled (On) and the occurrence of one of the Internal Status
Events. The signal state of the outgoing LAN event can be the same as or
inverted from the source internal status event.
Internal Status Events
For details on each key, use key help
as described on page 42.
Refer to the Programming Guide and the SCPI Command Reference.