Agilent Technologies N5161A Stereo System User Manual


 
Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 249
10 Real–Time Phase Noise Impairments (Option 432)
NOTE For the N5162A the softkey menus and features mentioned in this guide are only available
through the Web–Enabled MXG or SCPI commands. For information on the Web-Enabled
MXG, refer to the Installation Guide, the Programming Guide, and to the SCPI Command
Reference.
Before using this information, you should be familiar with the basic operation of the signal generator.
If you are not comfortable with functions such as setting the power level and frequency, refer to
Chapter 3, “Basic Operation,” on page 41 and familiarize yourself with the information in that
chapter.
This feature is available only in N5162A/82A Agilent MXG Vector Signal Generators with Option 431.
Option 431 requires Option 651, 652, or 654.
This chapter contains the softkey maps to locate the Phase Noise Impairment option functions and
information on the use of this feature.
Real–Time Phase Noise Impairment on page 250
The Agilent MXG Phase Noise Shape and Additive Phase Noise Impairments on page 251
Understanding the Phase Noise Adjustments on page 253
DAC Over–Range Conditions and Scaling on page 254