Agilent Technologies N5161A Stereo System User Manual


 
Agilent N5161A/62A/81A/82A/83A MXG Signal Generators User’s Guide 87
Preliminary Optimizing Performance
Preliminary Using the Dual Power Meter Display
17. Press Done
Calibration progress bar is displayed. Refer to Figure 5- 12 on page 87.
Figure 5-12 Running Calibration(s) Bar (Calibrating Sensor)
18. Press Return > Channel B to On
19. The current power meter sensor reading should be displayed on the MXG in the ChB portion of
the display and in the upper right corner of the display under Power Meter and to the left of the
Power Meter power sensor reading.
Figure 5-13 Channel B Power Sensor Displayed on MXG
20. The power sensors are now ready to be connected in a measurement setup.
For details on
each key, use key
help as described
on see page 42.
For details on
each key, use key
help as described
on see page 42.