Section 4B: Working With Your Pictures and Videos 213
Pictures & Videos
3. Aim your Treo, as you would any camera, to frame the
subject in the device’s screen. (Your Treo has a self-portrait
mirror next to the camera lens on the back of your device.
Use the mirror when you’re taking a picture or video and
you want to be in the picture too.)
4. (Optional) Adjust any of the following:
Ⅲ Zoom: Press Up to zoom in, or Down to zoom
out.
Ⅲ Brightness: Press Right to increase the brightness,
so you can take pictures in low-light environments, or press Left to decrease the
brightness.
Ⅲ Resolution: Press Menu (right softkey) and
select Resolution to change the image quality.
5. (Optional) Set a five-second timer: Press Menu (right softkey), select Mode, and
then select Timer.
6. Press Center to capture the picture or start the timer.
7. Hold your Treo still until the picture renders, and then press OK to save the picture,
or press Menu (right softkey) and select Delete to discard the picture.
8. Do either of the following:
Ⅲ Press Center to take another picture.
Ⅲ Press Thumbnails (left softkey) to return to Thumbnails view.
Tip
You can also adjust the zoom and brightness by pressing Menu and
selecting
Zoom or Brightness.
Did you know?
After three minutes of inactivity when you are previewing an image, the
camera goes into standby mode. Press any key or tap the screen to return
to the image preview.
