72 Chapter 3
Power-On Self Test
Messages
PB0L_B failed to go idle after memory init
Unable to force CPU PB2L_A into idle loop
Monarch completing memory initialization
This message indicates that the monarch processor is completing the
memory initialization assigned to the speciļ¬ed processor.
For example:
Using Monarch to initialize memory assigned to PB2L_A
PDT checksum failure
This message indicates that the page deallocation table structure failed
the checksum and was rebuilt to defaults. All bad page information is
lost.
For example:
Page Deallocation Table (PDT) checksum FAILED,
rebuilding...
Memory hardware change detected
This message indicates that POST detected a change in memory
hardware and cleared all entries in the PDT.
For example:
Detected a hardware change, clearing the Page
Deallocation Table (PDT).
Memory remapped
This message indicates that POST remapped memory to achieve HP-UX
good memory region. This occurs when a bad page is marked within the
good memory region.
For example:
Memory was re-mapped to achieve HP/UX good memory
region.
