Chapter 4 87
Test Controller
User interface
Test Configuration menu - Subtest display
Test Configuration Menu - Subtest Display
Subtest Description
0 subtest 0 description
1 subtest 1 description
. .
. .
n* subtest n description
An asterisk following the subtest number denotes that it is selected
for execution. For example, see the “n subtest n description” line.
• 3=Select Classes—Allows the user to specify which classes of subtests
to execute. These selections are in addition to any subtests selected.
The following prompt is displayed:
Enter class number:
The user must enter one of the following:
• An optional operator followed by a class number, for example 2, +2
or -2.
• Multiple class numbers (class, +class, -class are allowed)
separated by commas or spaces, for example 1,2,3.
The class numbers are decimal.
• 4=Select Subtests—Allows the user to specify which subtests to
execute. These selections are in addition to any classes selected. The
following prompt is displayed:
Enter subtest number or subtest range:
The user may enter one of the following:
• A single subtest number.
• A subtest range which consists of two numbers separated with a
dash and is inclusive. An example of a valid range entry is 100-
200.
• An optional operator followed by a subtest selection, for example
2, +2, -2, +100-200, or -100-200.
The subtest numbers are decimal values only.
