Chapter 4 83
Test Controller
User interface
Example Test Parameters display.
Test Configuration Menu - Test Parameters Display
CPUs: ( 1) 0 1 2 3* 4 5 6 7 8 9 A B C D E F
10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
SPACs: ( 1) 0* 1* 2* 3* 4* 5* 6* 7*
SMACs: ( 0) 0* 1* 2 3 4 5 6 7
STACs: ( 0) 0 1 2 3 4 5 6 7
SAGAs: ( 0) 0* 1 2 3 4* 5 6 7
Nodes: ( 1)
Loop Enable: ON OFF*
Loop Count: 00
Test Error Count: 01
Pause Test Start: ON OFF*
Pause Test End: ON OFF*
Pause Subtest Start: ON OFF*
Pause Subtest End: ON OFF*
Pause On Fail: ON* OFF
There are four fields:
• Date/Time—Date and time the error was logged.
• Subtest—Failing subtest number.
• Event Code—32-bit event code.
• Error Message—40-character error message
• A=Test Selection Menu—Invokes the menu. This menu allows the
user to select which tests to execute. An asterisk before the test name
denotes that it has been selected. Only the memory test is selected.
Selecting options 1 through A toggles the current state for that
particular test. Selecting option 0 returns the user to the main menu
shown below:
