222 Chapter 11
Utilities
dcm
MB5L_T - EMPTY
MB6R_T - EMPTY
MB7R_T - EMPTY
Memory:
=======
Physical: L=128MB, M=64MB, S=16MB Logical: l=128MB, m=64MB, s=16MB
(If logical memory not specified, then it matches physical memory size)
* = Software Deconfigured - = Not In Use
EWMB0:
======
EWMB0: Q0B0 S/S Q1B4 -/- Q2B0 -/- Q3B4 -/-
EWMB0: Q0B1 S/S Q1B5 -/- Q2B1 -/- Q3B5 -/-
EWMB0: Q0B2 S/S Q1B6 -/- Q2B2 -/- Q3B6 -/-
EWMB0: Q0B3 S/S Q1B7 -/- Q2B3 -/- Q3B7 -/-
EWMB1:
======
EWMB1: Q0B0 S/S Q1B4 -/- Q2B0 -/- Q3B4 -/-
EWMB1: Q0B1 S/S Q1B5 -/- Q2B1 -/- Q3B5 -/-
EWMB1: Q0B2 S/S Q1B6 -/- Q2B2 -/- Q3B6 -/-
EWMB1: Q0B3 S/S Q1B7 -/- Q2B3 -/- Q3B7 -/-
When invoked with dcm -d 80 <node id>, dcm returns 0 if all
installed DIMMs are 80-bit single-node DIMMs. dcm returns a 1 if one or
more 88-bit multinode DIMMs are detected.
When invoked with dcm -d 88 <node id>, dcm returns 0 if all
installed DIMMs are 88-bit single-node DIMMs. dcm returns a 1 if one or
more 80-bit multinode DIMMs are detected.
When invoked with dcm -d all <node id>, dcm returns 0 and
prints a table with the following format for a node with two EWMBs
installed that were half-populated with 88-bit DIMMs:
