A SERVICE OF

logo

Open as PDF
next previous
192 Chapter 10
Scan test
Running the est GUI
Gate array test window
The gate array test window provides a means to test all gate arrays in
the Exemplar system. The window is simple to use.
Figure 49 shows the est gate array test window.
Figure 49 est gate array test window
In the top panel, enter the following data in the appropriate fields:
• Board—Sets the location of the gate array.
• Type—Sets the type of gate array.
• Refdes—Sets the reference designation of the gate array.
• Jtag—Sets the associated JTAG identification.
When more than one field is used, est picks what to test by ANDing the
fields.