Filter
Top Products
> Use the arrow keys up/down to mark the line Export and confirm by pressing OK.
> To copy the marked file, you must now press the yellow function key Export.
The marked file will now be copied to the USB device, and will then be displayed on
the right half of the menu. Please note that this procedure may take quite some time,
depending on the size of the file.
Marking blocks
To mark several files simultaneously, proceed as follows:
> Press the OK key to go to the selection mode.
The marked file will be indicated by a cross on the left-hand side.
> You can now use the arrow keys up/down to also mark the preceding or the
following files.
> Once you have completed marking the desired files in this manner, press the yellow
function key Export to copy the marked files on to the hard drive.
8.3.3.2 Preview
This function allows you to start the playback of a file in a small preview window.
> Use the arrow keys to mark the file you would like to preview.
> Press the blue function key Functions to open a window showing the functions
available.
> Use the arrow keys up/down to mark the line Preview and confirm by pressing
OK.
> To start the preview of the marked file, you must now press the yellow function key
Preview.
8.3.3.3 Delete
You can also delete a file on the internal hard drive resp. on the USB device while working in
this menu.
> Use the red function key Set-Top-Box or the green function key USB devices to
switch to the source on which the file or folder to be deleted is located.
> Use the arrow keys up/down to mark the file or folder you wish to delete.
> Press the blue function key Functions to open a window listing the functions
available.
> Use the arrow keys up/down to mark the line Delete and confirm by pressing
OK.
> To delete the marked file resp. the marked folder, you must now press the yellow
function key Delete.
A query message will be displayed, asking whether you really wish to delete the
selected files.
> Use the arrow keys left/right to mark the field Yes and confirm by pressing OK.
Alternatively, select No and confirm by pressing OK in order to abort the procedure.
8.3.4 Hard drive information
> Press the OK key to display information on the integrated hard drive.
63
8