Filter
Top Products
9.5.3 Updating the programme list (ISIPRO)
The ISIPRO programme list updating function ensures that the programme list of your
receiver will automatically be kept up to date. To do this, a current programme list is
broadcast at regular intervals via satellite (ASTRA 19,2° East) and is available to your
receiver for downloading.
Should the parameters for the data channel used to download the programme list have
changed, you can correct them either in this menu or under Point 9.4.4 (manual programme
scan. Current transponder data can be obtained from your retailer. Generally, under normal
circumstances you should not make any changes in this menu.
> Press OK to go to the Update programme list submenu.
> In order for your receiver to check automatically whether a new programme list is
available, use the up/down arrow keys to mark the line Update.
> Switch the automatic programme list update on with the OK key.
ISIPRO channel
If the parameters of the data channel required for downloading the ISIPRO have changed,
you can correct them in this menu as described under Point 9.4.4 (manual programme
search). Current transponder data can be obtained from your retailer. Generally, under
normal circumstances you should not make any changes in this menu.
Start availability test manually
> To check for the presence of a new programme list manually, press the yellow
function key Check.
If a new programme list is available, a note will appear.
Start update
> To download the programme list, use the up/down arrow keys to mark the Start
update field and confirm with OK.
Your receiver will then re-start, and will indicate the availability of a new programme
list by displaying a message on screen.
9.5.3.1 New programme list available
When the receiver is switched on, a new, available programme list will be indicated to you by
a corresponding message, shown below.
9.5.3.2 Decline programme list
> If you do not wish to download the new programme list, press the red function key
Reject.
The message will only be displayed again when an even more up-to-date programme
list is transmitted.
9.5.3.3 Update programme list automatically
If you would like to have the updating of changes in the programme list performed
automatically, without any need for a manual procedure, then you should select this option.
The changes will be implemented automatically. Newly found programmes will generally be
added to the end of the Main Favourites list.
76
9