Filter
Top Products
> By pressing the yellow function key Turn to Sat the antenna will be turned to the
selected satellite position.
10.5 Deleting a satellite position
To delete a satellite position from the satellite list, proceed as follows:
> Use the arrow keys to mark the field Current satellite list.
> To open the current satellite list, press the OK key.
> Use the up/down arrow keys to select the satellite you wish to delete and confirm
with OK.
> Use the arrow keys to mark the field Delete satellite.
> To delete the satellite selected, press the OK key.
> Mark the field OK and confirm by pressing OK
10.6 Reference position
When installing the external installation, the motor must be set to the reference position (0°).
You can therefore use the function “Go to reference position” to turn the motor to this
position (0°) at any time.
> Press the green function key Ref. position. to turn the antenna automatically to
the reference position.
85
10