Filter
Top Products
> If you select the start category Genres you can then also select the preferred genre
(e.g. film, news, shows, etc.) as described above.
9.2.4 EPG channel
> Press the OK key to call up the EPG channel submenu.
If the parameters of the data channel required to load the EPGplus data have changed, you
can correct them in this menu. Current transponder data can be obtained from your retailer.
Generally, under normal circumstances you should not make any changes in this menu.
9.2.5 Selecting TV channels/programmes
To obtain a better overview, you can programme the electronic programme guide EPGplus to
contain only your favourite channels.
Please note:
The more channels you include in the electronic programme guide, the longer it takes to
download the EPGplus data. The download time will also be increased if channels are
selected for EPGplus for which no EPGplus data is available. Furthermore, it may no longer
be possible to provide the maximum 7-day preview as the number of channels in the
electronic programme guide increases.
> Press the OK key.
The Favourites list of TV channels will be displayed.
> Press the red function key to open a selection window.
Here you have the option of selecting the desired programme list type. You have the
option of selecting the desired programme list type. You can also select on of the
various Favourites lists. Refer also to Points 6.6.1 and 9.1.2.
> Using the up/down arrow keys select the type of programme list (e.g. favourites
lists).
> Confirm by pressing OK.
If the option of various Favourites lists was activated under Point 6.6.1, a selection
window showing the various Favourites lists will be displayed.
> Confirm by pressing OK.
The selected programme list will be displayed.
> Use the arrow keys to mark a channel you wish to include in the electronic
programme guide.
> Press the yellow function key EPG to include the marked channel in the electronic
programme guide or to remove it from the programme guide.
> To include several channels in the electronic programme guide simultaneously, mark
these as described in 9.1.4 (Marking blocks).
> When you have completed marking the desired channels in this manner, press the
yellow function key EPG to accept the marked programmes into the electronic
programme guide.
> Press the Menu key to return to normal operation.
You can now start the downloading procedure manually:
> Switch the receiver off using the On/Standby key (Standby).
> Now, while the message “Load EPG?” is shown in the display, press the EPG key.
The receiver will now perform the download procedure. This will be shown by the
69
9