TechniSat HD S2X CD Player User Manual


 
If the function is switched on you can configure four lists of favourites (main list,
favourites 1, favourites 2 and favourites 3). The ex-works programming can be found
in the main list.
When the function is switched off only the main list is active.
6.6.2 Display time Information Banner
> Use the numeric keys to set the desired display time for the Infobox. This can be
varied from 1 second to 15 seconds.
6.6.3 CI dual decoding
The CI dual decoding feature allows you to receive two different encrypted programmes
simultaneously, using only one CI module and only a single valid Smartcard.
> Use the left/right arrow keys to select the CI slot holding the CI module for dual
decoding. Select CI1, CI2 or CI1+CI2. If you prefer automatic recognition, select
auto. The setting off indicates the CI dual decoding feature is switched off.
Please also note Point 7.3.3.
6.6.4 Radio background picture
With this function the picture in the radio mode can be switched off. This is kinder to the
screen and you will save on current. Here:
on means the picture is switched on also in radio mode.
off means the picture will be turned off, in radio mode, after about 30 seconds and stays
off when a programme is changed.
auto means that the picture will be turned off after about 30 seconds in the radio mode and
will briefly automatically appear during a programme change.
> Use the right/left arrow keys to set on, off or auto.
6.6.5 Memory format radio recordings
Here you can select whether radio recordings on the hard drive should additionally be saved
in the MP2-format. These can be copied onto an external appliance.
> Use the right/left arrow keys to set PVR + MP2 in order to additionally save the
radio recordings in the MP2-format.
6.6.6 Font size
You can change the font size for the EPG long texts:
> Set large or small by using the right/left arrow keys.
6.6.7 Network settings
In this submenu you have the option of adapting the digital receiver to your Ethernet network
environment.
Accepting settings
To store the settings made in this menu to memory, please proceed as follows:
> Press the green function key Accept to store the changes made, and to return to
the menu Settings.
alternatively:
26
6