Filter
Top Products
777
Tact AudioTact AudioTact Audio
U
NPACKING
T
HE
RCS
2.2
XP
Carefully remove the RCS 2.2 XP and accessory kit from the carton and visually
check for shipping damage. Contact both the shipper and TacT Audio immediately
if the unit shows any sign of damage from rough handling. All TacT Audio equip-
ment is carefully inspected before leaving our factory.
KEEP SHIPPING CARTON AND PACKING MATERIALS for future use or in the
unlikely event that the unit needs servicing. If this unit is shipped without the
original packing, damage could occur and void the warranty.
You should fi nd the following items in the accessory kit:
•
1
AC mains cord
•
1 RJ11 data cable
•
1 RJ11-to-RS232 adapter
•
1 15’ RS232 cable
•
CD-ROM with RCS software
•
Measurement microphone
•
R
emote control
•
2 AAA batteries
•
T
his manual
The RCS 2.2 XP is designed with an automatic switching power supply. It will oper-
ate on
65-265 volts at 50-60 Hz.
No external settings are required.
The RCS 2.2X has three operating modes:
OFF
AC mains power is cut off , either via the rear panel mains
switch, or by unplugging it from the wall outlet.
STANDBY
The unit is powered but all outputs are muted and the display
is off . The unit uses very little current and is “idling” or “sleep-
ing”. Use the remote or front panel “STANDBY” button to
toggle between ON and STANDBY.
ON
Everything is powered and ready to go.
Accessories
Operating voltage