Filter
Top Products
CAUTIONCAUTION
42
Tact Audio
Front Panel
> Correction Menu
Use th
is menu
to se
t
individual
channel
level settings.
LEVELS
menu
Use the UP and DOWN buttons to place screen cursor on desired option and
then use the LEFT and RIGHT buttons to adjust individual channel level set-
tings.
Each output signal level is determined by the channel level, as set in this menu,
the master level control, and system GAIN as set in OPTIONS menu.
DELAYS
menu
Use th
is menu
to se
t
individual
channel
delay
settings.
Use the UP and DOWN buttons to place screen cursor on desired option and
then use the LEFT and RIGHT buttons to adjust individual channel level set-
tings.
Place screen cursor over fi eld (1) and press ENTER to switch between AUTO
and MANUAL delay time setup. When AUTO is selected the delay time is deter-
mined by the measurement algorithm during the measurement process. Mea-
sured delay time is saved with each measurement in the selected measurement
fi le. These values can be manually changed but once the correction preset is
re-selected, changes made to the delay time will be lost.
To use manually set delay times set the fi eld (1). Tact-2.2 XP keeps track of de-
lay times set for both AUTO and MANUAL delay option.