Filter
Top Products
17
Tact Audio
This operating mode assumes a stereo system consisting of two main channels
and one subwoofer. To select 2.1 mod from the main screen, click on the MENU
button to enter the main menu screen and then select the MODE menu. In the
MODE menu click on the STEREO 2.1 option. This will select 2.1 mode and dis-
play it on top of the screen (1).
Fig. 6. Mode menu. 2.1 mode selection is displayed in the upper left corner (1).
The rest of the procedure is the same as in 2.2 mode. Note the change in the
measurement screen in Fig. 7. The Tact-2.2 XP will automatically select channels
for measurements based on the mode selection.
2.1 Mode
Fig. 6. Mode menu. 2.1 mode selection is displayed in the upper left corner (1).
The rest of the procedure is the same as in 2.2 mode. Note the change in the
measurement screen in Fig. 7. The Tact-2.2 XP will automatically select channels
for measurements based on the mode selection.