Filter
Top Products
31
Tact Audio
Front Panel
> Main Menu
Use this menu to set the RCS 2.2 XP to one of four operating modes.
MODE menu
To
highlight an option use the navigational buttons. To enter a highlighted option
press the “
ENTER
” button.
STEREO 2.2 This mode produces 4 output signals. Left, Right, Left
SUB, and Right SUB
STEREO 2.1 This mode produces 3 output signals. Left, Right and one
SUB signal. In this mode the SUB signal is mono and is
output to both the Left SUB and Right SUB outputs.
STEREO 2.0
This mode produces 2 output signals. This is standard
two channel stereo mode. In this mode there is no signal
at the subwoofer outputs.
MONO
This option can be set to ON or OFF. When set to ON
the system will output the same signal for both the Left
and Right channels.