Filter
Top Products
43
Tact Audio
Front Panel
> Correction Menu
Use this screen to vie
w the s
ymbolic names ass
igned to each preset number.
NAMES
menu
Use the UP and DOWN buttons to place the screen cursor on desired option.
Press the enter button to engage the selected correction preset.
Use this screen to
set RCS 2.2 XP crossover parameters.
CR
O
me
nu
To highlight a menu option use the navigational buttons. To select a highlighted
option press the “
ENTER
” button.
1.
Use this option to set low-pass fi lter order. This option can be set from 1
to 24.
2.
Use this option to set the low-pass fi lter cutoff frequency. Minimum fre-
quency is 40 Hz and maximum frequency is 500 Hz.
3.
Use this option to set the high-pass fi lter order. This option can be set
from 1 to 12
4.
Use this option to set the high-pass fi lter cutoff frequency. Minimum fre-
quency is 40 Hz and maximum frequency is 500 Hz.
5.
Place the cursor on this option and press the ENTER button to turn
the
cr
ossover fi lters ON or OFF.
6.
Click on this option to engage selected crossover fi lters.
7.
Displays the currect correction preset.