Filter
Top Products
CAUTIONCAUTION
18
Tact Audio
2.0 Mode
This operating mode assumes a stereo system consisting of two main channels
only. To select 2.0 mode from the main screen, click on the MENU button to enter
main menu screen and then select the MODE menu. In the MODE menu click on
STEREO 2.0 option. This will select 2.0 mode and display it on top of the screen
(1).
Fig. 8. Mode menu. 2.0 mode selection is displayed in the upper left corner (1).
The rest of the procedure is the same as in 2.2 mode. Note the change in the
measurement screen in Fig. 9. The Tact-2.2 XP will automatically select channels
for measurements based on the mode selection.
Fig. 9. Measurement screen for 2.0 mode. Note that SR does not have a rectangle
around indicating that this channel is not set for measurement.
In 2.0 mode only the Left and Right channels will be measured. At the end of the
measurement process the Subwoofer Left and Subwoofer Right measurement
data will be set to 0 dB fl at response.