Filter
Top Products
9Tact Audio
RCS 2.0S Connections
Digital input
The RCS 2.0S has 5 digital inputs:
- three RCA (S/PDIF)
- one AES/EBU (XLR)
- one TosLink (S/PDIF)
All of the digital inputs supports PCM audio data with sampling rates from 32kHz to
96kHz /16-24 bits, however, the AES/EBU and RCA/coaxial input also supports
192kHz.
Digital Output
The RCS 2.0S has three digital outputs for the main channels :
- one RCA (S/PDIF)
- one AES/EBU (XLR)
- one TosLink
All outputs are 24-bits at 44.1, 48, 88, 96 or 192 kHz sampling rates (TosLink does
not support 192kHz). The output sampling rate is set in the “OFS” menu located in
the RCS 2.0S general menus.
Connect one of these outputs to a TacT digital amplifier or external DA converter.
Digital Input Section
Digital Output Section