Filter
Top Products
19Tact Audio
Use the “LEFT” and “RIGHT” buttons to highlight the desired option and select it by
pressing the “ENTER” button. The pink noise will output from either the “LEFT”,
“RIGHT”, or “L & R” channels combined while the “ENTER” button is pressed. The
test tone will stop when the enter button is released.
TEST menu
DISPL menu
Channel Test
LEFT RIGHT L & R
Display Timeout OFF
OFF ON
Front Panel Display
The Test menu allows for a quick system check. When engaged it will produce
pink noise on all selected channels. You can produce a test tone for the “LEFT”,
“RIGHT” and “L & R” channels combined.
Test Menu :
Display Menu :
2
1
1 - Display Timeout selections.
2 - Active Display Timeout setting.
The display menu controls the display Time-Out feature. This option is used to turn
the front panel timer “ON” or “OFF”. When this option is set to “ON” the front panel
timer will turn the front display off when the front panel or remote control has
not been accessed for 10 seconds. When this option is set to “OFF” the display
will remain lit whenever the unit is on. To wake the display, simply push any button
on either the front panel or the remote control.
Use the “LEFT” and “RIGHT” buttons to highlight the desired option and select it by
pressing the “ENTER” button.
3 2 3
1 - Left channel test.
2 - Right channel test.
3 - Left and Right channel test.