Filter
Top Products
CAUTION
CAUTION
22 Tact Audio
This menu is designed to set the polarity for each channel. Each channel can be
set to “+” (0) or “-” (inverted).
POL menu
Tttt
cc
POL: Left + Right +
+ - + -
The Parametric EQ menu is used to apply up to twelve bands of parametric equal-
ization per output channel. The EQ processing can be applied in two different
ways, both the left and right channels can be linked together to apply processing
globally, or both the left and right channels can be processed independently for
unique settings for each channel. Depending on the Link setting you will see one
of two PAREQ menu screens. Below is an example of both screens.
PAREQ menu
PRESET: 3 LINK: N
EQ: L R Y N
PRESET: 3 LINK: Y
EQ: L & R Y N
1 - Assignable Polarity values.
2 - Left channel active setting.
3 - Right channel active setting.
Front Panel Display
Polarity Menu :
Parametric EQ Menu :
1
1
2 3
Use the “LEFT” and “RIGHT” buttons to highlight the desired option and select it
with the “ENTER” button.
6 5
6
5
3
4
421
LinkedNot Linked
1 - Left channel PAREQ selection. - Link “N”
2 - Right channel PAREQ selection. - Link “N”
3 - Left &Right channel PAREQ selection. - Link “Y”
4 - Link assignment selections.
5 - Active Link setting.
3 - Active EQ preset. (selected from the main screen)
Use the “LEFT” and “RIGHT” buttons to highlight the desired option and select it
with the “ENTER” button.
Note: An EQ preset from the main screen must be selected to enable the
PAREQ or the Tone controls. If the EQ preset is set to “BP” the PAREQ and
Tone controls are disabled.