Filter
Top Products
CAUTION
CAUTION
34 Tact Audio
7 - Select the “Program” button and follow the prompts by answering all
questions. You will need to be able to answer “Yes” to all questions to start the
programming. The RCS 2.0S will turn OFF and the ON and return to normal
operation.
6 - From the TacT 2.0S RCS software main screen, click on “Add-Ins” and then
“Standard”. You should now see the Add-Ins window.
Tact-2.0 S
Programing Mode
Update the RCS 2.0S Firmware
5 - Press and hold the “DIGITAL” and “ANALOG” buttons on the front panel of the
RCS 2.0S simultaneously while you turn the unit back ON from the rear-panel
mains switch. Hold the buttons until the display shows the “PROGRAMMING
MODE” screen.