Filter
Top Products
35Tact Audio
1
Step IV:
Reprogram the
RCS 2.0S System Files
After updating the firmware the System Files now need to be reprogrammed.
3 - Left click your mouse in the square next to System to select it with a check
mark.
2 - Press and hold the “Control” key on your computer keyboard and then press
the “S” key simultaneously. This should display the System Option (1) in the
bottom center of the programming window.
1 - From the RCS 2.0S software main screen, click on the “Program TacT-2.0 S”
button. You should now see the programming window.
4 - Press the “Program” button and follow the prompts by answering all
questions. You will need to be able to answer “Yes” to all questions to start the
system file reprogramming. The Program window will display a “programming
complete” message when the system is completed.
Update the RCS 2.0S Firmware