Filter
Top Products
21Tact Audio
REM menu
REMOTE CONTROL: ON
OFF ON
ADDR menu
NOTE: If you change the device address make sure that you select the ap-
propriate device address in the RCS 2.0S Room Correction software.
CURRENT ADDRESS: 001
ADDRESS: 001
Front Panel Display
Remote Menu :
Address Menu :
2
1
1 - Remote control settings.
2 - Active remote control setting.
The remote menu allows for disabling or enabling the remote control. Once the re-
mote control is disabled the unit can only be controlled from the front panel of the
unit.
Use the “LEFT” and “RIGHT” buttons to highlight the desired option and select it
with the “ENTER” button.
1
2
1 - Address settings.
2 - Active address setting.
The address menu allows for the setting of the systems exclusive address for the
unit. The default address setting is “001”. If multiple Tact products are used to-
gether, different addresses will allow for individual control of each product.
Use the “UP” and “DOWN” navigational buttons to select the desired system ad-
dress and then press the “ENTER” button to select it.