Filter
Top Products
CAUTION
CAUTION
36 Tact Audio
Step V:
Restoring the Default
RCS 2.0S Settings
This step is optional and is only required if you would like to reset all
internal settings in the unit to their factory defaults. If you proceed
you will erase your custom user settings.
Restore the default settings for the new firmware installed on the RCS 2.0S.
1- From the RCS 2.0S correction software main screen, click on the “Options”
menu selection and select the “Default Settings” option. You should now see the
Default Settings window.
NOTE: If you have TacT digital amplifiers attached to the RCS 2.0S you must
set the “AMP” settings to “DISABLED”. The default settings will not be
programed if these parameters are set to “ENABLED”.
2- Select the “Default” button and the default parameters for the RCS 2.0S will be
loaded into the RCS 2.0S. The RCS 2.0S will turn OFF and the ON and return to
normal operation.
You have now completed updating your RCS 2.0S and it is ready for normal
operation.
RCS 2.0S
update complete
Update the RCS 2.0S Firmware