Filter
Top Products
7
Getting Started
AM loop aerial
Extend the FM lead aerial
horizontally
Jack type B
AM
FM
75
COAXIAL
3 Connect the mains lead to the mains.
If the plug of the mains lead does not fit
your mains, attach the supplied adaptor on
to the plug (for models with a plug adaptor).
To turn on the system, press ?/1 .
Inserting two R6 (size AA)
batteries into the remote
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
Setting the time
1 Turn on the system.
2 Press CLOCK/TIMER SET on the
remote.
Proceed to step 5 when you set the clock for
the first time.
3 Press . or > on the remote to
select “CLOCK SET?”.
4 Press ENTER/YES on the remote.
5 Press + or – on the remote to set the
day.
6 Press ENTER/YES or M on the
remote.
The hour indication flashes.
7 Press + or – on the remote to set the
hour.
8 Press ENTER/YES or M on the
remote.
The minute indication flashes.
9 Press + or – on the remote to set the
minute.
10
Press ENTER/YES on the remote.
The clock starts working.
If you made a mistake
Press m or M on the remote repeatedly
until the incorrect item flashes, then set it
again.
To change the preset time
Start over from step 1.