Filter
Top Products
40
Check the timer Select the timer number (REC
1 to 3) in step 2 above, then
press ENTER/YES on the
remote.
Change the setting Start over from step 1.
Tip
When you record from the radio, the station name
(see “Labelling the preset stations” on page 36, or
frequency when the station is not labelled), the start
time and the stop time are automatically recorded on
the MD.
Notes
• The Smart Space and Level Synchro Recording
functions do not operate.
• Do not operate the system from the time the system
turns on until the recording starts (about 30 seconds
before the preset time).
• When you record on a brand new MD, the first
15 seconds are not recorded.
• If the system is on about 30 seconds before the
preset time, the timer-recording will not be
activated.
• The volume is reduced to minimum during
recording.
Timer recording radio programmes
(continued)
Activate/Cancel the
timer
1 Press CLOCK/TIMER
SELECT, then press .
or > on the remote until
“REC SELECT?” appears
and press ENTER/YES on
the remote.
2 Press m or M on the
remote repeatedly to select
the timer number (REC 1
to 3), then press . or
> on the remote to
select the timer number
(set) or “–” (cancel) and
press ENTER/YES on the
remote. If you have not set
the recording timer, “.”
appears instead of the timer
number or “–”.
Optional Components
Hooking up the optional
components
You can connect a digital or an analogue
component to this system. You can also
connect a personal computer to the PC LINK
connector and operate the system from the
personal computer.
To the audio input jacks
of an analogue
component
To the audio output
jacks of an analogue
component
PC LINK
To the digital output
jack of a digital
component
To Do this