Filter
Top Products
41
Timer/Optional Components/Additional Information
Additional Information
Precautions
On operating voltage
Before operating the system, check that the operating
voltage of your system is identical with the voltage of
your local power supply.
On safety
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.
• Unplug the system from the mains if it is not to be
used for an extended period of time.
To disconnect the mains lead, pull it out by the
plug. Never pull the mains lead itself.
• Should any solid object or liquid fall into the
system, unplug the system and have it checked by
qualified personnel before operating it any further.
• AC power cord (mains lead) must be changed only
at the qualified service shop.
• When you connect the mains lead to the mains,
even if the power is off, the system begins charging
for remote and timer functions. Therefore the
surface of this unit become warm, this is normal.
• To prevent fire, do not Cover the ventilation of the
apparatus with news papers, table-cloths, curtains,
etc. And don’t place lighted candles on the
apparatus.
On placement
• If you raise the volume during use, the system fan
turns on automatically to prevent heat build-up in
the system. To ensure efficient heat radiation, leave
sufficient space to the rear, and do not place
anything on the top of the system.
• Place the system in a location with adequate
ventilation to prevent heat build up.
• Do not place the system in an inclined position.
• Do not place the system in locations where it is;
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight.
On heat buildup
• Although the unit heats up during operation, this is
not a malfunction.
• Place the unit in a location with adequate
ventilation to prevent heat buildup in the unit.
If you continuously use this unit at a large volume,
the cabinet temperature of the top, side and bottom
rises considerably. To avoid burning yourself, do not
touch the cabinet.
To prevent a malfunction, do not cover the ventilation
hole for the cooling fan.
continued
To Do this
Make a digital
recording from a
digital component
on an MD
Connect a digital cable.
Listen to the
connected digital
component
Press FUNCTION repeatedly to
switch the function to OPTICAL
IN.
Make an analogue
recording from an
analogue
component on an
MD
Connect the audio cords.
Listen to the
connected
analogue
component
Press FUNCTION repeatedly to
switch the function to TAPE.
Operate the
system from a
personal computer
Connect the personal computer
to the PC LINK connector using
a Sony PC connection kit
(option) that supports this
system.