Filter
Top Products
12
4 Enter a character using the remote.
If you have selected uppercase or
lowercase letters
1 Press the corresponding letter button
repeatedly until the character to be
entered flashes.
Or, press the button once and press .
or > repeatedly.
2 Press CURSORt.
The flashing character is entered and the
cursor shifts to the right.
If you have selected numbers
Press the corresponding number button.
The number is entered and the cursor shifts
to the right.
To enter a blank space
1 Press SELECT repeatedly until “Selected
AB” or “Selected ab” appears in the
display.
2 Press 10/0.
A blank space is entered and the cursor
shifts to the right.
5 Repeat steps 3 and 4 to enter the rest
of the name.
To change a character
Press TCURSOR or CURSORt on the
remote repeatedly until the character to be
changed flashes, press CLEAR on the
remote to erase the character, then repeat
steps 3 and 4.
6 Press ENTER/YES on the remote to
complete the labelling procedure.
To cancel labelling
Press MENU/NO on the remote.
Checking the disc titles
1 Press MENU/NO on the remote in stop
mode.
2 Press . or > for the CD repeatedly
until “Name Check?” appears, then
press ENTER/YES on the remote.
3 Press . or > for the CD repeatedly
to select the disc titles stored in the
system memory between 001 to 100.
To check the current disc title
Press SCROLL on the remote in stop mode.
Labelling a CD
— Disc Memo
You can label up to 100 CDs with titles of up
to 20 symbols and characters. Whenever you
load a labelled CD, the title appears in the
display.
Note
When labelling CDs for the first time, be sure
to erase all disc titles stored in the system
memory (see “Erasing a disc title” on the
next page).
1 Press FUNCTION repeatedly to switch
the function to CD.
If “SHUFFLE” or “PROGRAM” appears in
the display, press PLAY MODE repeatedly
until both disappear.
2 Press NAME EDIT on the remote.
The cursor starts flashing.
3 Press SELECT on the remote to select
the desired type of character.
Each time you press the button, the display
changes cyclically as follows:
Selected AB* (Upper cases) t Selected ab
(Lower cases) t Selected 12 (Numbers)
* Press number 1 repeatedly to display the
following symbols.
‘ – / , . ( ) : ! ?
In addition, when the symbols above appear in
the display, press . or > for the CD
repeatedly to display the following symbols.
& + < > _ = ” ; # $ % @
`