Filter
Top Products
21
MD – Recording
Marking track numbers
• Automatically during recording
Track numbers are automatically marked as on
the original source during recording from this
system’s CD player or components connected
to the DIGITAL OPTICAL IN jack. Use the
Level Synchro Recording function to
automatically mark track numbers during
recording from this system’s tuner or
components connected to the TAPE IN jacks.
• At any point during recording
You can mark track numbers during recording
of any source.
• After recording
Use the Divide Function (see “Dividing
recorded tracks” on page 29).
Marking track numbers
automatically during recording
— Level-Synchro Recording
The Level Synchro Recording function is
factory set to on, so the track numbers are
automatically marked. If “L-SYNC” does not
appear during recording, turn on the Level
Synchro Recording as follows. Track numbers
are automatically marked when the input signal
is continuously below a certain level for more
than two seconds and then exceeds that level.
Notes
• You cannot mark track numbers automatically if the
sound source to be recorded is noisy (e.g., tapes or
radio programmes) or during timer-recording.
• If you pause recording during CD recording, a track
number is recorded at that point. Also, note that the
tracks might be recorded as the same single track
with a single track number when the same single
track of the same CD is recorded repeatedly.
1 Press FUNCTION repeatedly to switch the
function to MD.
2 Press MENU/NO on the remote repeatedly
until “Setup Menu” appears.
3 Press . or > for the MD until “T.Mark
Off” (or “T.Mark LSync”) appears, then
press ENTER/YES on the remote.
4 Press . or > for the MD to select the
setting, then press ENTER/YES on the
remote.
To Select
Turn on the Level
Synchro Recording
function
T.Mark LSync
(factory setting)
Turn off the Level
Synchro Recording
function
T.Mark Off
When you set the Level Synchro Recording
function, “L-SYNC” lights up.
5 Press MENU/NO on the remote.
To continue and record, follow the
procedures described on the various
recording pages.
continued