Filter
Top Products
23
MD – Recording
Turn on the Smart
Space function
S.Space On
(factory setting)
Turn off the Smart
Space function
S.Space Off
5 Press MENU/NO on the remote.
To continue and record, follow the
procedures described on the various
recording pages.
Tip
To restart the recording when “Auto Cut” appears in
the display, press MD NX (or MD N on the
remote).
1 Press FUNCTION repeatedly to switch
the function to MD.
2 Press MENU/NO on the remote
repeatedly until “Setup Menu” appears.
3 Press . or > for the MD until
“S.Space Off” (or “S.Space On”)
appears, then press ENTER/YES on the
remote.
4 Press . or > for the MD to select
the setting, then press ENTER/YES on
the remote.
To Select
Adjusting the recording level
When recording on an MD, you can adjust the
recording level to the desired volume. You can
adjust the recording level not only when
making an analogue recording, but also when
making a digital recording from a CD, etc.
1 Prepare the desired sound source to
record and start play.
2 Confirm that the MD deck is in
recording standby. If not, press MD z
REC on the remote.
3 Press MENU/NO on the remote
repeatedly until “Setup Menu” appears.
4 Press . or > for the MD until
“LevelAdjust?” appears, then press
ENTER/YES on the remote.
5 Press . or > for the MD to adjust
the recording level.
While monitoring the sound, adjust to the
optimum level while making sure that
“OVER” does not appear in the display at
the loudest portion.
6 Press ENTER/YES on the remote.
7 Press MENU/NO on the remote.
8 Press x for the MD.
9 When a CD or other sound source is
playing, stop playback.
To continue and record, follow the
procedures described on the various
recording pages.
Tips
• You can also adjust the recording level during
recording.
• Once adjusted, the recording level is maintained
until you adjust it again.
• You cannot adjust the recording level during CD-
MD Synchro Recording.