Sony CMT-PX333 Stereo System User Manual


 
50
CD
Check and CD Position appear alternately
The disc could not be read properly.
Complete!
CD editing (Disc Memo) finished normally.
File Full
There are already 100 disc titles stored in the
system.
No Disc
There is no CD in the CD player.
OVER
You have reached the end of the CD while
pressing M for the CD during play or pause.
Push STOP!
You pressed PLAY MODE during play.
Step Full!
You tried to programme 26 or more tracks (steps).
Specifications
Main Unit (HCD-PX333)
Amplifier section
European model:
DIN power output (Rated):20 + 20 watts
(6 ohms at 1 kHz, DIN,
230 V)
Continuous RMS power output (Reference):
25 + 25 watts
(6 ohms at 1 kHz,
10% THD, 230 V)
Music power output (Reference):
50 + 50 watts
Other models:
DIN power output (Rated):20 + 20 watts (6 ohms at
1 kHz, DIN, 240 V)
18 + 18 watts (6 ohms at
1 kHz, DIN, 220 V)
Continuous RMS power output (Reference):
25 + 25 watts
(6 ohms at 1 kHz, 10%
THD, 240 V)
23 + 23 watts
(6 ohms at 1 kHz, 10%
THD, 220 V)
Inputs
TAPE IN (phono jacks): voltage 250 mV,
impedance 47 kilohms
DIGITAL OPTICAL IN (Supported sampling
frequencies: 32 kHz, 44.1 kHz and 48 kHz)
Outputs
TAPE OUT (phono jacks):voltage 250 mV,
impedance 1 kilohm
PHONES (stereo minijack):
accepts headphones of
8 ohms or more.
SPEAKER: accepts impedance of 6 to
16 ohms.
CD player section
System Compact disc and digital
audio system
Laser Semiconductor laser
(λ=800 nm)
Emission duration:
continuous
Frequency response 2 Hz 20 kHz
Self-diagnosis display (continued)