Filter
Top Products
10
Programming CD tracks
— Programme Play
You can make a programme of up to 25 tracks.
1 Press FUNCTION repeatedly to switch
the function to CD.
2 Press PLAY MODE repeatedly until
“PROGRAM” appears.
3 Press . or > for the CD until the
desired track number appears.
Tip
You can also select the desired track using the
remote.
Press the number buttons. The playback automatically
starts.
To enter track number over 10
(on the remote only)
1 Press >10.
2 Enter the corresponding digits.
To enter 0, press 10/0 instead.
Example:
To enter track number 30, press >10, then 3 and 10/0.
Notes
• The play mode cannot be changed while playing a
disc.
• If you press ZCD to open or close the disc tray
while listening to the radio, the CD icon lights even
if there is no CD in the tray.
To turn off the CD icon, press FUNCTION
repeatedly to switch the function to CD.
Playing a CD (continued)
Selected
track number
Playing time of the
selected track
4 Press ENTER/YES on the remote.
The track is programmed.
“Step” appears, followed by the number of
the track in the programmed sequence. The
number of the last programmed track
appears, followed by the total playing time
of the programme.
Last programmed
track number
Total playing time