Filter
Top Products
15
MD – Play
Perform steps 3 and 4.
Press x for the MD, then press
PLAY MODE repeatedly until
“PROGRAM” and “SHUFFLE”
disappear.
Press TIME on the remote in stop
mode. The total number of
programmed steps appears,
followed by the last programmed
track number and the total playing
time of the programme.
Press . or > for the MD
repeatedly during Programme
Play.
Check the total
number of
programmed
tracks
Check the
programme
order
Press CLEAR on the remote in
stop mode.
Cancel
Programme Play
Clear a track
from the end
Add a track to
the programme
in stop mode
5 To programme additional tracks, repeat
steps 3 and 4.
6 Press MD NX (or MD N on the
remote).
To Do this
Using the MD display
Checking the remaining time
Press TIME on the remote repeatedly
during play.
The display changes cyclically as follows:
Elapsed playing time and the track number on
the current track t Remaining time and the
track number on the current track t
Remaining time on the MD
Checking the total playing
time
Press TIME on the remote repeatedly in
stop mode.
The display changes cyclically as follows:
Total number of tracks and total playing time
t Remaining recordable time (Only for a
recordable MD)
Checking a track title or a
disc title
Press DISPLAY on the remote repeatedly
during play or in stop mode.
The display changes cyclically as follows:
Preset Equalizer name t Clock t Volume
t Track title or disc title*
* The track title appears during play, and the disc title
appears while stopped. If an MD that has no title is
loaded, nothing appears.
Tip
You can check a track title at any time during play. If
you press SCROLL on the remote, a track title
appears scrolling in the display.
Press SCROLL on the remote at any point during the
scroll display to stop the scrolling. Press SCROLL on
the remote again to restart the scrolling.
Select the
desired track
using the
number buttons
on the remote
Use number buttons instead of
performing steps 3 and 4. To use
number buttons, see page 14.
Tips
• The programme you made remains after
Programme Play finishes. To play the same
programme again, press MD NX (or MD N on
the remote).
•“---.--” appears when the total MD programme time
exceeds 1,000 minutes.