Filter
Top Products
22
Making a space between
tracks 3 seconds long
— Smart Space
The Smart Space function lets you make the
blank spaces between tracks 3 seconds long
automatically while making a digital recording
from a CD. For other types of recording, if the
Smart Space function is on and there is no
sound input for about 3 seconds or more (but
less than 30 seconds) while recording, the MD
deck replaces this silence with a blank of about
3 seconds and continues recording.
No sound input for less than 30 seconds
Off
On
Replaced with a blank of 3 seconds and
recording continues
Auto Cut: When the Smart Space function is
on, if there is no sound input for 30 seconds or
more, the MD deck replaces this silence with a
blank of about 3 seconds and enters recording
pause.
No sound input for 30 seconds or more
Off
On
To change the trigger level for Level
Synchro Recording
Perform the following procedure to change the
signal level that triggers Level Synchro
Recording.
1 Press FUNCTION repeatedly to switch the
function to MD.
2 Press MENU/NO on the remote repeatedly
until “Setup Menu” appears.
3 Press . or > for the MD until “LS(T)”
appears, then press ENTER/YES on the
remote.
4 Press . or > for the MD to select the
level, then press ENTER/YES on the
remote.
You can set the level at any value between
–72 dB and 0 dB, in 2 dB steps.
5 Press MENU/NO on the remote.
Marking track numbers at a specific
point during recording
— Track Mark
You can mark track numbers at any time during
Manual Recording, regardless of the type of
sound source.
Press REC/REC IT (or MD z REC on the
remote) during recording at the point you
want to add a track mark.
The tracks following the added one are
renumbered.
Replaced with a blank of 3 seconds and
recording pauses
Recording tips (continued)