Filter
Top Products
47
GB
Tape – Play / Tape – Recording
CMT-CP505MD 4-241-515-11(1) GB
Recording on a tape
manually
— Manual Recording
You can record just the portions you like from
a CD or an MD on a tape. You can also record
a radio programme.
You can use TYPE I (normal) tape.
1 Load a recordable tape.
2 Press FUNCTION repeatedly to select
the desired source to record.
• CD: To record from this system’s CD
player.
• MD: To record from this system’s MD
deck.
• TUNER: To record from this system’s
tuner.
• OPTICAL IN: To record from the
optional component connected to the
DIGITAL OPTICAL IN jack.
• ANALOG IN: To record from the
optional component connected to the
ANALOG IN jacks.
3 Press TAPE zREC.
“N” lights up and the tape deck stands by
for recording.
To start recording from the side facing away
from you, press TAPE nN until
“n” lights up.
4 Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
If you start from the reverse side, recording
stops at the end of the reverse side.
5 Press X, then start playing the desired
source to record.
To
Stop recording
Pause recording
Do this
Press TAPE x.
Press X.
Sound Adjustment
Adjusting the sound
Generating a more dynamic
sound (Dynamic Sound
Generator)
Press DSG.
To cancel the DSG, press DSG again.
Adjusting the bass
Turn BASS.
You can adjust the bass in 9 steps.
Adjusting the treble
Turn TREBLE.
You can adjust the treble in 9 steps.
Adjusting the bass and treble using
the remote
1 Press BASS/TRE on the remote repeatedly
to select “BASS” or “TREBLE”.
2 While “BASS” or “TREBLE” appears, press
. or > on the remote repeatedly to
adjust the level.
Sound Adjustment