Filter
Top Products
30
GB
CMT-CP505MD 4-241-515-11(1) GB
To change the character
In step 3 or 4, press TCURSOR or
CURSORt repeatedly until the character to
be changed flashes, press CLEAR on the
remote to erase the character, then repeat steps
3 and 4.
To add a character
After steps 1 and 2, press TCURSOR or
CURSORt until the cursor comes to the point
you want to add a character, then proceed to
step 3.
Tip
You can label a track title during playback. The
playback repeats until you finish labelling.
Note
If you enter the symbol “//” between the characters in
disc titles such as “abc//def”, you may be unable to
use the Group Function.
Checking the titles
To check the disc titles, press SCROLL on the
remote in stop mode. To check the track title,
press SCROLL on the remote during playback.
The title appears scrolling in the display.
To check the group titles, press GROUP ON/
OFF repeatedly in stop mode until GROUP
indicator lights up, press GROUP SKIP
repeatedly until the desired group appears, then
press SCROLL on the remote.
To stop scrolling, press SCROLL on the
remote. Press the button again to resume
scrolling.
Erasing the titles
1 To erase group titles, press GROUP
ON/OFF repeatedly in stop mode until
GROUP indicator lights up.
2 Press MENU/NO on the remote in stop
mode.
3 Press . or > on the remote
repeatedly until “Nm Erase?” appears,
then press ENTER/YES on the remote.
4 To erase disc titles
Press . or > on the remote repeatedly
until “Nm Ers Disc” appears, then press
ENTER/YES on the remote.
To erase track titles
Press . or > on the remote repeatedly
until the desired track number appears, then
press ENTER/YES on the remote.
To erase group titles
Press . or > on the remote repeatedly
until the group number appears, press
GROUP SKIP repeatedly until the desired
group number appears, then press ENTER/
YES on the remote.
“Complete!” appears.
Note
You cannot erase the title of a group that does not
have any tracks registered.
Labelling an MD (continued)