Filter
Top Products
27
GB
MD – Recording
CMT-CP505MD 4-241-515-11(1) GB
High-Speed CD-MD Synchro
Recording
When using CD-MD Synchro Recording or
when recording a CD in the programmed order,
you can record at high speed (approximately
four times the normal speed). Select the setting
when using High-Speed CD-MD Synchro
Recording (page 20).
If you cannot use High-Speed CD-MD
Synchro Recording
When “Retry” flashes
A reading failure has occurred, and the system
is trying to read the data again.
• If the retry was successful, the system
continues with High-Speed CD-MD Synchro
Recording.
• If the condition of the inserted CD or the
system is poor, and retry fails, High-Speed
CD-MD Synchro Recording is disabled. In
this case, “NORM” flashes in the display and
the MD deck automatically starts recording
in normal CD-MD Synchro Recording. Note
that monitoring of the recorded signal is not
possible when this occurs.
Notes
• You cannot listen to the sound while recording.
• The following items are either inoperative or cannot
be used during High-Speed CD-MD Synchro
Recording:
– The Auto Cut Function
– The recording level specified in the Setup menu
(The recording level is set to 0.0 dB)