Filter
Top Products
36
GB
CMT-CP505MD 4-241-515-11(1) GB
Moving recorded tracks (continued)
5 Press . or > on the remote
repeatedly until the new track position
appears.
6 Press ENTER/YES on the remote.
Note
When you move a track to a track number that is
registered into a group, the moved track is re-
registered into the group. In addition, if you move a
track that is registered into a group to a track number
that is not registered into a group, the group
registration of the moved track is released. However,
when the Group Function is on, you can only move
tracks within the selected group.
Dividing recorded tracks
— Divide Function
You can use this function to mark track
numbers after recording. You can also use this
funciton when recording from tapes or radio
programs and track numbers are not marked
automatically, and want to mark tracks. The
total number of tracks increases by one and all
the tracks following the divided ones are
renumbered.
Example: Dividing track 2 into two tracks.
1 Press MD on the remote.
2 Press MENU/NO on the remote to
display “Edit Menu”.
3 Press . or > on the remote
repeatedly until “Divide?” appears,
then press ENTER/YES on the remote.
Playback starts.
4 Press . or > on the remote
repeatedly until the desired track
number to divide appears.
5 While monitoring the sound, press
ENTER/YES on the remote at the point
to be divided.
“—Rehearsal—” appears and the portion to
be divided is played repeatedly.
Original track number New track position
TOC
L-SYNC
12 3
123 4
A
AB C D
CBD
Track number
Original
tracks
After
DIVIDE
Divide track 2 into
track B and C