Filter
Top Products
34
GB
CMT-CP505MD 4-241-515-11(1) GB
Erasing recordings (continued)
Erasing all tracks
— All Erase Function
You can erase all the contents recorded on an
MD (the disc title, group titles, all recorded
tracks and their titles) at once.
1 Press MD on the remote.
2 Press MENU/NO on the remote to
display “Edit Menu”.
3 Press . or > on the remote
repeatedly until “All Erase?” appears,
then press ENTER/YES on the remote.
“All Erase??” appears.
4 Press ENTER/YES on the remote again.
Note
If you perform the above operation when the Group
Function is on, not only the tracks within the group,
but all the tracks on the MD are erased.
Erasing a portion of a track
— A-B Erase Function
You can specify a portion within a track and
erase the portion with ease. You can shift the
desired portion by frame*, minute or second
intervals.
This function is convenient to erase the
unneccessary parts recorded from satellite
broadcast or radio programs.
*1 frame is 1/86 second.
Example: Erasing a portion of track 2.
12
12
3
3
AB-A
B(A+C)C
B-B B-C
A
1 Press MD on the remote.
2 Press MENU/NO on the remote to
display “Edit Menu”.
3 Press . or > on the remote
repeatedly until “A-B Erase?” appears,
then press ENTER/YES on the remote.
Playback starts.
4 Press . or > on the remote
repeatedly until the desired track
number appears.
5 While monitoring the sound, press
ENTER/YES on the remote at the
starting point of the portion to be
erased (point A).
“—Rehearsal—” and “Point A ok?” appear
alternately while the deck repeats a few
seconds of a portion before point A.
Point BPoint A
Track number
Original
tracks
After A-B
ERASE