Filter
Top Products
11
GB
CD
CMT-CP505MD 4-241-515-11(1) GB
5 To program additional tracks, repeat
steps 3 and 4.
6 Press N on the remote.
Other operations
To
Cancel Program
Play
Check the
program order
Check the total
number of
programmed
tracks
Add a track to
the end of the
program
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press N
on the remote. However, the program is cleared
when you open the disc tray.
• “--.--” appears when the total program time exceeds
100 minutes or when you select a CD track whose
number is 21 or over.
• If you select “AL” in step 3, all the tracks on the
disc are selected.
Do this
Press PLAY MODE in stop mode
repeatedly until both “SHUF” and
“PGM” disappear.
Press . or > on the remote
repeatedly during Program Play.
Press DISPLAY on the remote in
stop mode. The total number of
programmed steps appears,
followed by the total playing time
of the program.
Perform steps 3 and 4 in stop
mode.
Labelling a CD
— Disc Memo
You can label up to 50 CDs with titles of up to
20 symbols and characters. Whenever you load
a labelled CD, the title appears.
Notes
• You cannot label a CD for which “TEXT” appears
in the display.
• When labelling CDs for the first time, be
sure to erase all disc titles stored in the
system memory (see “Erasing a disc title”
on page 13).
1 Press CD on the remote.
If “SHUF” or “PGM” appears, press PLAY
MODE repeatedly until both disappear.
2 Press NAME EDIT/SELECT on the
remote in stop mode.
The cursor starts flashing.
3 Press NAME EDIT/SELECT on the
remote repeatedly to select the desired
type of character.
Character type Select
Alphabet (upper cases)/ Selected AB
blank space/symbols
Alphabet (lower cases)/ Selected ab
blank space/symbols
Numbers Selected 12
continued