Filter
Top Products
43
GB
Tuner
CMT-CP505MD 4-241-515-11(1) GB
Listening to non-preset radio
station
— Manual Tuning
1
Press
TUNER BAND repeatedly
to
select “FM” or “AM”.
2 Press TUNING MODE repeatedly until
“AUTO” and “PRESET” disappear from
the display.
3 Turn TUNING +/– clockwise or
counterclockwise to tune in the desired
station.
Tips
• To improve broadcast reception, adjust the supplied
antennas, or connect a commercially available
external antenna.
• When an FM stereo program has static noise, press
FM MODE repeatedly until “MONO” appears.
There will be no stereo effect, but the reception will
improve.
• Press TUNING MODE repeatedly until “AUTO”
appears in step 2 above, then turn TUNING +/–.
The frequency indication changes and scanning
stops when the system tunes in a station (Automatic
Tuning).
• To record the radio programs, use manual recording
(pages 21 and 47).
Labelling the preset
stations
— Station Name
You can label each preset station with up to 12
characters (Station Name).
1
Tune in the station you want to label
(see “Listening to the radio” on page
42).
2 Press NAME EDIT/SELECT on the
remote.
The cursor starts flashing.
3 Perform steps 3 to 6 of “Labelling a
CD” (page 11).
To cancel
Press MENU/NO on the remote.
To erase the station name
1 Tune in the preset station you want to
erase the station name.
2 Press NAME EDIT/SELECT on the remote.
3 Press CLEAR on the remote repeatedly to
erase the name.
4 Press ENTER/YES on the remote.
TOC
L-SYNC
Cursor