Filter
Top Products
44
GB
CMT-CP505MD 4-241-515-11(1) GB
Using the Radio Data
System (RDS)
(European model only)
What is the Radio Data
System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. RDS is available only on FM
stations.*
Note
RDS may not work properly if the station you are
tuned in is not transmitting the RDS signal properly
or if the signal is weak.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name appears in the
display.
To check the RDS information
Each time you press DISPLAY on the remote,
the display changes cyclically as follows:
Station name* t Frequency t Clock display
t BASS level t TREBLE level
* If the RDS broadcast is not properly received, the
station name may not appear in the display.
Tape – Play
Loading a tape
1 Press Z PUSH.
2 Load a recorded/recordable tape into
the cassette holder.
Playing a tape
You can use TYPE I (normal) tape.
1 Press FUNCTION repeatedly to switch
the function to TAPE.
2 Press DIRECTION repeatedly to select
“g” to play one side of a tape, “h”
to play both sides, or “j”
*
to play
both sides repeatedly.
* The tape deck stops automatically after
repeating the sequence five times.
3 Press TAPE nN.
Press TAPE nN again to play the
bottom side.
Other operations
To
Stop play
Pause
Fast-forward or
rewind
Remove the tape
Do this
Press TAPE x (or x on the
remote).
Press X. Press again to resume
play.
Turn m/M clockwise or
counterclockwise (or press m or
M on the remote).
Press Z PUSH.
With the side you
want to play/
record facing up