Filter
Top Products
40
GB
CMT-CP505MD 4-241-515-11(1) GB
Fade-in and Fade-out
Recording
1 Press MD on the remote.
2 Press MENU/NO on the remote to
display “Edit Menu”.
3 Press . or > on the remote
repeatedly until “S.F Edit?” appears,
then press ENTER/YES on the remote.
4 Press . or > on the remote
repeatedly until “Fade In?” or “Fade
Out?” appears, then press ENTER/YES
on the remote.
5 Press . or > on the remote
repeatedly until the track number you
want to change the recording level
appears, then press ENTER/YES on the
remote.
“Time 5.0s” appears.
6 While monitoring the sound, press .
or > on the remote repeatedly to
change the Fade-in or Fade-out
recording time.
The system plays the portion that will be
recorded over using Fade-in or Fade-out
Recording. You can set the time at any
value between 1.0 second and 15.0 seconds,
in 0.1 second steps. You cannot set the time
longer than the track.
7 Press ENTER/YES on the remote.
“S.F Edit OK?” appears.
8 Press ENTER/YES on the remote again.
The deck starts recording over the existing
track. “S.F Edit: ** %” appears while the
track is being recorded. When the recording
finishes, “Complete!” appears.
Notes
• You cannot change the recording level of the tracks
recorded in MDLP mode.
• Repeatedly changing the recording level results in
poor sound quality.
• The recording level will not return to the exact
original level once the recording level has been
changed even if it returned to the original level.
• The recording level cannot be changed while the
timer is activated.
• You cannot undo the S.F Edit Function even if you
use the Undo Function.
Changing the recorded level after
recording (continued)